Hydrogen is hard on valves
Under pressure, the hydrogen molecule H2 cracks metal and can even penetrate steel. Hydrogen fracture weakens the tensile strength and ductility of steel, which reduces its resistance to fracture and causes cracking.
The ball valve is an excellent shut-off valve. As a very tight valve, it is suitable for use with gases and liquids. Photo: Valmet
Valves and similar equipment are the hardest hit when hydrogen pipes are built. When building hydrogen pipelines, 80% of the cost is generally spent on valves, compressors, metering equipment and heat exchangers, as these are the most demanding parts to produce. The joints are also the most prone to gas leakage.
-
For the hydrogen industry, each valve is made to individual requirements, because large valves for heavy industrial use are generally custom-made, says Mikko Tikka, sales manager at Valmet.
Conversion of natural gas infrastructure may not be worthwhile
The cheapest way to transport large quantities of hydrogen within the continents is usually by gas pipeline. Across Europe, there are plans to convert old natural gas pipelines to transport hydrogen. According to Mr Tikka, getting approval in different locations could prove too expensive.
-
From a material point of view, the materials used in equipment - such as valves - are often suitable for hydrogen. It is more a question of old equipment often not being worthwhile or able to be approved to modern safety or environmental standards - even if it is completely refurbished. In other words, upgrading a valve or other old equipment from what it was originally designed for is like building a new Mercedes-Benz from spare parts in the body and chassis of an old car. It often makes no sense and the end result is not technically sound, Tikka argues.
Valmet's expertise from Neles
Valmet's valve expertise comes in particular from the Neles heritage. Neles valves have already been used in tens of thousands of hydrogen and oxygen applications around the world. The merger between Neles and Valmet was completed last year.
Hydrogen has always been used in applications such as oil refining. Now, as the hydrogen industry grows rapidly, Valmet is drawing on what Neles has learned from supplying valves to the oil and gas industry since the 1960s.
Today, Valmet offers a wide range of segment, butterfly, ball and other valves for hydrogen applications ranging from electrolysis to carbon recovery. The valves operate both in low pressure electrolysers and in high pressure electrolysers operating at temperatures up to 700˚C.
Electrolysers typically need to respond very quickly to supply fluctuations when dealing with renewable energy. This means that internal processes require rapid adjustment, and valves must provide accurate control with fast response times.
Automation also available
Valmet's aim is to have Valmet automation in the zero-emission hydrogen production plants as well.
-
The electrolysis process, for example, requires customised application programs and an efficient history collection system from the automation system, says Heikki Tanner, Sales Manager.
The hydrogen plant has many safety-critical valves, and fault diagnostics are an essential part of the automation system's functionality.
Oxygen can be more difficult than hydrogen
Tikka and Tanner will demonstrate the manufacturing process at the valve production plant in Vantaa, and different valves will also be shown being tested in different ways in the large factory hall under strictly regulated conditions.
Hydrogen may not even be the most difficult gas to build hydrogen plants with - and equipment used with oxygen gas in testing therefore seems to get more attention than hydrogen equipment. To avoid accidents, oxygen equipment and pipes are given a final cleaning before the process is started.
-
When working with oxygen, everything must be extremely clean, because oxygen is an oxidising agent and compressing oxygen also provides ignition energy. Contaminants in the oxygen lines in an electrolysis plant, for example, can cause an explosion, says Tikka.
You can visit Valmet’s office in Vantaa and learn more about valve operation and production automation in hydrogen production by attending BotH2nia goes Helsinki on 1-2 June.
A wide range of valves on display in Vantaa. Johannes Soranta and Mikko Tikka (left) demonstrate valves to Visa Noronen. Photo by Tiina Kurri.
Mikko Tikka (left) and Heikki Tanner walk around the Valmet’s factory hall always wearing safety vests and goggles. Photo by Tiina Kurri